利用闲置屋顶安装太阳能光伏组件，将太阳能转换为电能，既能提供清洁电能又节能环保，还能创造一定的收益。所以不少企业、家庭，都希望在自家厂房上、屋顶安装太阳能光伏电站，那么可以安装的条件是什么呢？下面
厂房屋顶光伏发电厂家为您进行讲解。
The idle roof is used to install solar photovoltaic modules to convert solar energy into electric energy, which can not only provide clean electric energy, but also save energy and create certain benefits. So many enterprises and families want to install solar photovoltaic power plants on their own plants and roofs. What are the conditions for installation? The following workshop roof photovoltaic power generation manufacturer will explain to you.
条件主要有这几点：
The main conditions are as follows:
1、有独立屋顶或者屋顶产权清晰，如果是高层屋顶，通常屋顶属于公共区域，若想安装光伏系统，需获得全体邻居的同意。
1. There is an independent roof or the property right of the roof is clear. If it is a high-rise roof, usually the roof belongs to the public area. If you want to install a photovoltaic system, you need to obtain the consent of all neighbors.
2、屋顶要有足够的光照，毕竟是靠太阳能发电，如果光照不足，发电量也就很不理想。所以不能有树木、女儿墙等障碍物遮挡光照，形成阴影。
2. The roof should have enough light. After all, solar power is used to generate electricity. If the light is not enough, the power generation is not ideal. Therefore, no trees, parapets and other obstacles can block the light and form shadows.
3、屋顶有足够的面积。屋顶面积跟安装面积成正比，以5KW光伏电站为例，光伏组件数量大约为16片，要求屋顶可用面积大于35平方米左右，如果不足，则无法安装。另外屋顶要是一个规则平面的话，同样的面积安装容量也会更大。
3. The roof has enough area. The roof area is proportional to the installation area. Take the 5KW photovoltaic power station as an example, the number of photovoltaic modules is about 16, and the available roof area is required to be more than 35 square meters. If it is insufficient, it cannot be installed. In addition, if the roof is a regular plane, the installation capacity of the same area will be larger.
4、屋顶要有足够的承重能力。光伏发电设备，光伏组件、支架以及光伏线缆具备一定的重量，如果房屋过于老旧，承载能力不佳，那么安装后，可能出现倒塌的情况，所以需要房屋有一定的承重能力。
4. The roof shall have sufficient bearing capacity. PV power generation equipment, PV modules, supports and PV cables have a certain weight. If the house is too old and has poor bearing capacity, it may collapse after installation, so the house needs to have a certain bearing capacity.
The four conditions for photovoltaic power generation on the roof of the plant are as above. If you have any doubts or needs, please come to our website //tianjibiotech.com Consult!
当前位置：
